Thermal Pretreatment of Harvest Residues and Their Use in Anaerobic Co-digestion with Dairy Cow Manure

Several batch experiments were conducted on the anaerobic co-digestion of dairy cow manure (DCM) with three harvest residues (HR) (soybean straw, sunflower stalks, and corn stover). The influence of thermal pretreatment of HR on biogas production was investigated, where the HR were thermally pretreated at two different temperatures: T = 121 °C and T = 175 °C, during t = 30 and t = 90 min, respectively. All anaerobic co-digestion batch experiments were performed simultaneously under thermophilic regime, at T = 55 °C. Biogas and methane yields were significantly improved in experiments performed with corn stover thermally pretreated at 175 °C for 30 min (491.37 cm³/g VS and 306.96 cm³/g VS, respectively), if compared to experiments performed with untreated corn stover. The highest VS and COD removal rates were also observed in the same group of experiments and were 34.5 and 50.1%, respectively. The highest biogas and methane yields with soybean straw (418.93 cm³/g VS and 261.44 cm³/g VS, respectively) were obtained when soybean straw pretreated at 121 °C during 90 min. The highest biogas and methane yields with sunflower stalk (393.28 cm³/g VS and 245.02 cm³/g VS, respectively) were obtained when sunflower stalk was pretreated at 121 °C during 90 min.     

Nanoscale degradation of polypyrrole films under oxidative stress: An atomic force microscopy study and review

Atomic force microscopy (AFM) is employed to monitor the surface morphology of polypyrrole (PPy) films grown on vitreous carbon substrates during the catalytic reduction of Cr(VI) to Cr(III). The morphology of freshly-prepared films depends on substrate characteristics. Upon reaction, uniform nodules of aggregated PPy clusters appear. No significant differences in surface morphology are found between its oxidized and reduced forms. Loss of catalytic activity after 8-9 oxidation/reduction cycles of exposure to the chromate solution (oxidation) and electrochemical recharging of the film at negative potentials (reduction) correlates well with the observed polymer film dissolution/detachment from the carbon substrate. Formation of well-defined circular features (PPy rings) at different stages leads to a model for the film degradation process that includes formation of Cl₂ gas inside the polymer matrix. In the final stages, the bulk of the film typically fractures and detaches from the electrode. A catalytically inactive, ultrathin PPy layer remains on the substrate even after prolonged exposure to the target solution. A review of techniques for the study of PPy aging/degradation is given.     

21 Tesla Fourier Transform Ion Cyclotron Resonance Mass Spectrometer Greatly Expands Mass Spectrometry Toolbox

We provide the initial performance evaluation of a 21 Tesla Fourier transform ion cyclotron resonance mass spectrometer operating at the Environmental Molecular Sciences Laboratory at the Pacific Northwest National Laboratory. The spectrometer constructed for the 21T system employs a commercial dual linear ion trap mass spectrometer coupled to a FTICR spectrometer designed and built in-house. Performance gains from moving to higher magnetic field strength are exemplified by the measurement of peptide isotopic fine structure, complex natural organic matter mixtures, and large proteins. Accurate determination of isotopic fine structure was demonstrated for doubly charged Substance P with minimal spectral averaging, and 8158 molecular formulas assigned to Suwannee River Fulvic Acid standard with root-mean-square (RMS) error of 10 ppb. We also demonstrated superior performance for intact proteins; namely, broadband isotopic resolution of the entire charge state distribution of apo-transferrin (78 kDa) and facile isotopic resolution of monoclonal antibody under a variety of acquisition parameters (e.g., 6 s time-domains with absorption mode processing yielded resolution of approximately 1 M at m/z?=?2700).

Open image in new window

Graphical Abstract ?

     

Utilizing a Robotic Sprayer for High Lateral and Mass Resolution MALDI FT-ICR MSI of Microbial Cultures

The ability to visualize biochemical interactions between microbial communities using MALDI MSI has provided tremendous insights into a variety of biological fields. Matrix application using a sieve proved to be incredibly useful, but it has many limitations that include uneven matrix coverage and limitation in the types of matrices that could be employed in studies. Recently, there has been a concerted effort to improve matrix application for studying agar plated microbial cultures, many of which utilized automated matrix sprayers. Here, we describe the usefulness of using a robotic sprayer for matrix application. The robotic sprayer has two-dimensional control over where matrix is applied, and a heated capillary that allows for rapid drying of the applied matrix. This method provided a significant increase in MALDI sensitivity over the sieve method, as demonstrated by FT-ICR MS analysis, facilitating the ability to gain higher lateral resolution MS images of Bacillus subtilis than previously reported. This method also allowed for the use of different matrices to be applied to the culture surfaces.

Open image in new window

Graphical Abstract ?

     

AgTh2(PO4)3 — A new case of the non-hydrogen bonded phosphate ferroelectric

The basic crystallographic data of AgTh₂(PO₄)₃ single crystals have been determined for the first time by means of X-ray diffraction methods. The crystals are monoclinic, space group isCc with four formula units per unit cell. The dimensions of the unit cell are:a=17·385 Å,b=6·815 Å,c=8·148 Å,β=101·10°. Using the Sawyer and Tower method it has been proved that the crystals possess ferroelectric properties. Performing the measurements at room temperature the values of spontaneous polarization and coercive field in the direction normal to (100) face have been determined.     

Pulsradiolytische Untersuchungen der Reaktion des e aq − mit halogenierten aromatischen Verbindungen

Kinetic pulse radiolysis experiments (1 s pulse duration) on the reaction of e _aq ^– with halogenated aromatic compounds (fluoro-, chloro-, bromobenzene, benzylchloride and phenethylchloride were carried out in order to check the existence and to investigate the fate of an electron adduct. The measured absorption spectra, being identical with those previously observed for the phenyl and benzyl radical, and thepH dependence of the formation of the H-adducts, indicating no protonation of an intermediateRX ^–, can be explained simply by quantitative elimination of the halide. No evidence for the existence of an electron adduct as an intermediate could be obtained under the applied experimental conditions.

     

trans-Bis(azido-κN)bis(pyridine-2-carboxamide-κ2N1,O2)nickel(II)

In the title compound, [Ni(N₃)₂(C₆H₆N₂O)₂], the Ni^II atom lies on an inversion centre. The distorted octahedral nickel(II) coordination environment contains two planar trans-related N,O-chelating picolinamide ligands in one plane and two monodentate azide ligands perpendicular to this plane. Molecules are linked into a three-dimensional framework by N—H...N hydrogen bonds.     

Vibrational spectroscopy of indium-doped Pb0.9Mn0.1Te alloy

Raman scattering and far-infrared reflection spectra of 0.5 at.% In doped Pb_0.9Mn_0.1Te single crystal at temperatures between 10 and 300K are presented. The infrared spectra have been fitted using a modified plasmon-phonon interaction model with an additional oscillator (at about 122 cm^?1) representing a local In-impurity mode. Phonons in this mixed crystal exhibit intermediate mode behavior. The plasma frequency decreases on cooling from 300 to 25K and increases sharply between 20 and 10 K. The results of galvanomagnetic measurements are also presented.     

Grid oscillators

Loading a two-dimensional grid with active devices offers a means of combining the power of solid-state oscillators in the microwave and millimeter-wave range. The grid structure allows a large number of negative resistance devices to be combined. This approach is attractive because the active devices do not require an external locking signal, and the combining is done in free space. In addition, the loaded grid is a planar structure amenable to monolithic integration. Measurements on a 25-MESFET grid at 9.7 GHz show power-combining and frequencylocking without an external locking signal, with an ERP of 37 W. Experimental far-field patterns agree with theoretical results obtained using reciprocity.